1. the installation of assembly type clean rooms should be carried out indoors after the decoration works are completed. Indoor space must be clean, dust-free, and in the construction and installation process of parts and sites at any time to clean, clean.
2. In construction and installation, hanging and anchoring parts should be fixed first with the main structure, floor and ground.
3. the ground surface must be leveled, and its roughness should not be greater than 0.1%. When making coil surface or coating surface, the sealing should be considered at the junction with vertical wall panels.
4. Strictly lay out the line before the installation of the panels, the corner should be vertically handed over to prevent the cumulative error caused by the tilt and distortion of the panels, the deviation of the verticality of the panels should not be greater than 0.2%.
5. the ceiling should be arched according to the width of the room, so that the ceiling will be kept smooth during the use of the load. The surrounding of the ceiling should be closely connected with the wall.
6. during installation, the plastic protective film on the surface of the panel must not be ripped off.
7. All kinds of components and materials should be stored in a clean, dry environment with envelopes, placing smoothly on the moisture-proof film.
8. Opening and sealing of components and materials should be carried out in a clean environment. The specifications, performance and integrity should be strictly checked. Installation of unqualified or damaged components is strictly prohibited.
9. The materials that need to be bonded to the surface, the surfaces and grooves that need to be filled with sealant must be cleaned strictly to remove impurities and oil stains, to ensure the compactness of the paste, and to prevent shedding and ash deposition.
10. the installation gap of the assembly type clean room must be sealed with sealant.
This article is published by the aseptic room decoration, do you know something about these contents? For more information, please click: , we will have more wonderful content for you to see.