• 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 无尘车间墙顶地施工方法是什么吗?
    来源: 浏览: 发布日期:2018-11-21
    无尘车间施工项目离不开墙顶地的施工和装修,无尘车间施工的标准和合格准则一直是所有人关心的问题,随着洁净室污染源的控制效果增加及末级过滤器效率的提高等,对有关规范、导则等标准和提出的规范也在追年提高,不管怎么说,一些基础的规范还是要进行严格把控的,接下来就相关的施工准则,进行相关的归纳和总结。
    The construction project of dust-free workshop can not be separated from the construction and repair of the top of the wall. The standards and qualified criteria for the construction of dust-free workshop have always been the concern of all people. With the increase of the control effect of pollution sources in clean rooms and the improvement of the efficiency of final filters, the standards and proposed criteria are also improving year after year. In any case, some basic norms should be strictly controlled. Next, relevant construction criteria should be summarized and summarized.
    净化车间内墙壁和顶棚的装修应符合下列要求:
    The decoration of walls and ceilings in the purification workshop should meet the following requirements:
    1、净化车间内墙壁和顶棚的表面,应平整、光滑、不起尘、避免眩光,便于除尘,并减少凹凸面
    1. The surfaces of the walls and roofs in the purification workshop should be smooth, smooth, dustproof, avoid glare, facilitate dust removal and reduce concave and convex surfaces.
    2、踢脚不应突出墙面;
    2, kick the foot should not highlight the wall.
    3、净化车间不宜采用砌筑墙抹灰墙面,当必须采用时宜采用干燥作业,抹灰应采用高级抹灰标准。墙面抹灰后应刷涂料面层,并应选用难燃,不开裂、耐腐蚀、耐清洗、表面光滑、不易吸水变质发霉的涂料。
    3. The cleaning workshop should not adopt the masonry wall to plaster the wall. When it is necessary to adopt the drying operation, the plastering should adopt the advanced plastering standard. After plastering, the wall should be painted with a non-flammable, non-cracking, anti-corrosion, anti-cleaning, smooth surface, not easy to absorb water, deteriorate and mildew paint.
    净化车间地面设计应符合下列要求:
    The floor design of the cleaning workshop should meet the following requirements:
    1、净化车间地面满足生产工艺要求。
    1. The floor of the purification workshop meets the production process requirements.
    2、万级净化车间地面应平整,耐磨、易清洗,不易积聚静电,避免眩光,不开裂等。
    2. The floor of 10,000-grade purification workshop should be flat, wear-resistant, easy to clean, not easy to accumulate static electricity, avoid glare, not cracking, etc.
    3、地面垫层宜配筋,潮湿地区垫层应做防潮构造。
    3. The floor mat should be reinforced, and the damp layer should be moistureproof.
    洁净厂房技术夹层的墙壁和顶棚表面宜平整、光滑,位于地下的技术夹层应采取防水或防潮、防霉措施。
    The walls and roof surfaces of technical interlayer of clean workshop should be smooth and smooth, and the underground technical interlayer should adopt waterproof or moisture-proof and mildew-proof measures.
    净化车间(区)外窗设计应符合下列要求:
    The exterior window design of the cleaning workshop (area) should meet the following requirements:
    1、净化车间(区)和人员净化用室设置外窗时,应采用双层玻璃固定窗,并应有良好的气密性。
    1. Double-glazed fixed windows should be used in cleaning workshop (district) and personnel cleaning room, and good air tightness should be ensured.
    2、靠净化车间室内一侧窗不宜设窗台。
    2. It is not suitable to set window sills in the indoor side windows of the purification workshop.
    净化车间内墙壁和顶棚的装修应符合下列要求:
    The decoration of walls and ceilings in the purification workshop should meet the following requirements:
    1、净化车间内墙壁和顶棚的表面,应平整、光滑、不起尘、避免眩光,便于除尘,并减少凹凸面;
    1. The surfaces of the walls and roofs in the purification workshop should be smooth, smooth, dustproof, avoid glare, facilitate dust removal and reduce concave and convex surfaces.
    2、踢脚不应突出墙面;
    2, kick the foot should not highlight the wall.
    3、净化车间不宜采用砌筑墙抹灰墙面,当必须采用时宜采用干燥作业,抹灰应采用高级抹灰标准。墙面抹灰后应刷涂料面层,并应选用难燃,不开裂、耐腐蚀、耐清洗、表面光滑、不易吸水变质发霉的涂料。
    3. The cleaning workshop should not adopt the masonry wall to plaster the wall. When it is necessary to adopt the drying operation, the plastering should adopt the advanced plastering standard. After plastering, the wall should be painted with a non-flammable, non-cracking, anti-corrosion, anti-cleaning, smooth surface, not easy to absorb water, deteriorate and mildew paint.
    净化车间地面设计应符合下列要求:
    The floor design of the cleaning workshop should meet the following requirements:
    1、净化车间地面满足生产工艺要求。
    1. The floor of the purification workshop meets the production process requirements.
    2、万级净化车间地面应平整,耐磨、易清洗,不易积聚静电,避免眩光,不开裂等。
    2. The floor of 10,000-grade purification workshop should be flat, wear-resistant, easy to clean, not easy to accumulate static electricity, avoid glare, not cracking, etc.
    3、地面垫层宜配筋,潮湿地区垫层应做防潮构造。
    3. The floor mat should be reinforced, and the damp layer should be moistureproof.
    洁净厂房技术夹层的墙壁和顶棚表面宜平整、光滑,位于地下的技术夹层应采取防水或防潮、防霉措施。
    The walls and roof surfaces of technical interlayer of clean workshop should be smooth and smooth, and the underground technical interlayer should adopt waterproof or moisture-proof and mildew-proof measures.
    净化车间(区)外窗设计应符合下列要求:
    The exterior window design of the cleaning workshop (area) should meet the following requirements:
    1、净化车间(区)和人员净化用室设置外窗时,应采用双层玻璃固定窗,并应有良好的气密性。
    1. Double-glazed fixed windows should be used in cleaning workshop (district) and personnel cleaning room, and good air tightness should be ensured.
    2、靠净化车间室内一侧窗不宜设窗台。
    2. It is not suitable to set window sills in the indoor side windows of the purification workshop.
    以上信息是由大家无菌室装修厂家整理发布希翼对您有所帮助如果想要了解更多请点击大家的网站
    The above information is organized and published by our aseptic room decoration manufacturer. I hope it will be helpful to you. If you want to know more, please click on our website !
    XML 地图 | Sitemap 地图